Re: 47 Custom carpet question.
Posted by BDeB On 2014/6/25 12:54:23
Quote:
Some measurements for the front carpet backing pad (without carpet) that may help:
The back edge of the pad is fairly straight and the distance to the rear of the cutout is 20-3/8"
The cutout is not symmetrical and the distance at carpet center from the rear to a line drawn across from the ends of the cut is 2-3/8" with 1-1/4" to the front of the cut for a total of 3-5/8"
Distance from the front edge of the cut to the front of the pad is 8-7/8"
The sideways width of the cut is 10-3/4" to each side from the carpet center for a total of 21-1/2"
Here is a picture with the dimensions:
Attach file:
Size: 322.88 KB; Hits: 72
JD in KC wrote:
BDeB,
If I send you a SASE, would it be possible for you to send me an outline on paper of the ellipse cut for the transmission hump? I managed to make a passable cut for my '50 but would like to get it perfect for my '49. Some locating dimensions for the cut would also be really helpful.
Thanks.
Some measurements for the front carpet backing pad (without carpet) that may help:
The back edge of the pad is fairly straight and the distance to the rear of the cutout is 20-3/8"
The cutout is not symmetrical and the distance at carpet center from the rear to a line drawn across from the ends of the cut is 2-3/8" with 1-1/4" to the front of the cut for a total of 3-5/8"
Distance from the front edge of the cut to the front of the pad is 8-7/8"
The sideways width of the cut is 10-3/4" to each side from the carpet center for a total of 21-1/2"
Here is a picture with the dimensions:
Attach file:
Size: 322.88 KB; Hits: 72This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=145923