Re: 1947 Custom Super Clipper Eight Touring Sedan
Posted by Clemens On 2014/7/27 17:49:56
Quote:
That is what I was looking for!
The modern tape was my work. I had to replace the wire connecting the horn button with the lower horn terminal.
The unidentified cables were tugged to the left hand side and attached with some cable ties but they are long enough to connect to the carb starter switch.
I will investigate this tomorrow!
Regards,
Clemens
Depending on whether your car has the Electro clutch I believe the upper or horn section has either 4 or possibly 6 or 8 wires in total. I can't tell for sure how many you have but looks like 4 with maybe a modern wire taped on??
Without EC, it has 4 wires and from the start point it goes about 18-20 inches toward the horn where 2 horn wires exit and other two continue on another approx 16 inches to the carb starter switch. Horn will have the spade type connectors as does the starter switch.
That is what I was looking for!
The modern tape was my work. I had to replace the wire connecting the horn button with the lower horn terminal.
The unidentified cables were tugged to the left hand side and attached with some cable ties but they are long enough to connect to the carb starter switch.
I will investigate this tomorrow!
Regards,
Clemens
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=147578