Re: New to Forum and Needing Help Starting Car

Posted by Fish'n Jim On 2014/9/14 11:24:10
If it's turning slow, check the starter and see if it's getting hot.
If the motors stuck, it'll load the starter and heat up. If the voltage/amperage is just low then the starter won't heat, just turn slow.
Make sure you let it cool between starts, dont; keep cranking if no start. Wires and starter when hot require more juice. Heat in wire will also indicate too small wire size or poor condition.
I don't think this has the carb starter but don't know - someone with later model.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=149916