Re: 49 23 series head light switch

Posted by John Brinegar On 2014/10/20 16:05:13

Deskdriver - You have to remove the switch plate assembly or at least drop it down so you can access the switches. I have dropped mine down, but. have to do it again, as the headlight switch is still not working properly. You can drop the assembly down, as HH56 suggested. After removing everything in the way, remove the two barrel nuts that hold the assembly in. A suggestion - I made a nut holder out off a wooden pencil -sharpen one end and it can be inserted into the barrel nuts to hold them and then replace them. Otherwise there is not enough room between the light switch and next one to get to one of the barrel nuts. Of course , you have to first loosen them with a screwdriver. After you drop the assembly down, you can get to any of the switches. Hope this helps -