Re: 1949 2362 Front Inner and Outer Wheel Bearings

Posted by HH56 On 2014/10/29 16:45:46

Don't know if your seals are the same as 47 but one thing I did find on the cross number given for 47 seals in the chart someone put together is the depth. The diameters were perfect but the Packard item was very narrow compared to the SKF cross that Napa carries. Trying to use the cross seal and they would not seat deep enough to let the hub fit back on the spindle without seal rubbing the backing plate. In case yours are the same item you might want to verify that dimension before buying any cross seals.