Re: 21-23 series rubber sill plates.
Posted by Clemens On 2015/1/17 16:28:58
Hello Howard,
I just took measurements on my 1947 (2106) sill plates and the outermost rib is 9 -10 mm (0.375'') straight through from front to aft on both sides.
All the inner ribs are of same width.
Can't see the rib widening as a sensible design by packard since the human eye discovers such an irregularity pretty easily.
I'll try to make a picture of it tomorrow (way to dark in the barn right now).
Silly
Regards,
Clemens
I just took measurements on my 1947 (2106) sill plates and the outermost rib is 9 -10 mm (0.375'') straight through from front to aft on both sides.
All the inner ribs are of same width.
Can't see the rib widening as a sensible design by packard since the human eye discovers such an irregularity pretty easily.
I'll try to make a picture of it tomorrow (way to dark in the barn right now).
Silly
Regards,Clemens
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=156182