Re: 1946 Clipper Deluxe Pinion seal

Posted by Dell On 2014/11/18 18:00:05

dallas; this has been covered before on the sight. you can get a seal from max merrett. you must mark the pinion shaft and nut with a center punch so that you can tighten the nut to the same spot to maintain the preload on the bearings. the seal is healed in an adapter, if you can remove the adapter and seal with out damage and then remove the seal from from the adapter it can be reused-its hard to do. i have the seal number at home and will be back there on the 24th. pm me if you need it. dell