Re: starter question on 1951 200

Posted by Owen_Dyneto On 2015/3/16 13:46:20

I didn't know that the crankshaft can be turned manually

Absolutely. From either the front or rear, though the front is easier; sometimes just by putting a little tension on the fan belt and pulling on the fan (though be careful not to bend it), but more positively by using the large bolt holding the vibration damper to the crankshaft. From the rear by removing the cover from the clutch or torque converter and using the gear teeth and a fulcrum. Obviously, removing the spark plugs makes it much easier.

In either case make sure the ignition is DISABLED (e.g. coil wire removed) before doing it.