Re: Gas tank fuel sender repair.

Posted by Dave Kenney On 2008/10/13 15:12:04

The sender is the original and the dash gauge is the magnetic type and is what I replaced. I did do the ohm meter test and it appears to vary as the float rod is moved back and forth. I took it apart to check the windings on the resistor and the contact appear to be OK. The ground wires are fine. I am thinking that the contact on the resistor isn't good enough in places. Is there a diagram or description to show how the contact should be bent. I hate to spend $150 on a rebuilt unit if this one only needs an adjustment. I do have one on my parts car that may be OK. Thanks for your quick response and help! It is very much appreciate BTW this is our Thanksgiving Day in Canada.