Re: turn signals finally fixed!

Posted by David Grubbs On 2015/8/25 11:18:18
HA56 - the front turn signals come to a quick(maybe) disconnect plug at the front fender, drivers' side. One wire is orange and the other white. On my car, the wires had frayed on the downstream side of the plug - the side closest to the light. I will be that if you take the plug loose and either replace it and the frayed wire, or paint on some liquid insulation that it will cure your problem. I don't think you have any thing wrong in the switch.

you can test the unit by unplugging the switch wires under the dash. There is a 6 prong plug there, and you can attach the multimeter to the blue wire and the orange and white wires. By moving the switch, you should get continuity thru them if all is well.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=165806