Here is the inner rear of my other Pat, you can see the outer secures to the wheel well and to the trunk flooring. there are a few stiffeners as stated. With the C2C products, they are not a zip and fit, you will need to roll your edges, and make some forms. On my rear, I had to use metal stretchers, and shrinker to achieve the correct bends.
Attach file:
(53.92 KB)
(132.16 KB)
(103.80 KB)
(96.30 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=167158