Re: 288 Won't Go

Posted by Owen_Dyneto On 2015/9/26 13:05:46

Since you say the valve faces and seats were pitted, just hand-lapping would not really accomplish much of anything. If you come across the same situation in the future borrow a power valve seat resurfacing kit from someone, assuming the guides are OK just do the seats and have the valves resurfaced (assuming enough margin remains).

Here's my kit, an old Black & Decker/Sioux; these are around in reasonable numbers and I'd recommend also finding someone who knows how to grind/narrow the seats and align (center, more or less) them on the valve face.

Attach file:

---

  (104.70 KB)