Re: 54 Packard 327. 2 barrel carb wgd-2102s. rebuild

Posted by Owen_Dyneto On 2015/11/1 9:16:00

As I saw it it appears that the broken portion is elevated above the casting and the "well" was open from the rear, so I thought cutting a slot for a screwdriver would be easy - perhaps I saw it incorrectly. If you try an easy-out, I'd recommend the type pictured; stronger, less likely to break and easier to control than the more conventional type. The disadvantage of the easy-out is that to grip the brass securely it will apply an outward force, pressing the brass against the threads - the broad-blade screwdriver eliminates that.

Attach file:

---

  (73.85 KB)