Re: Manual brake conversion
Posted by Chris R On 2021/4/28 11:34:06
Quote:
Hey Howard,
Yeah, it is kind of hard to see in the pictures. I've reattached the one where its easiest to see, but circled the area in red. It's still really dark but hopefully it helps.
It looks as though the plate is underneath the pivot area which I believe would push backwards if the pedal was pushed forwards.
I imagine the 52-54 plate is above the pivot point which would push forward as the pedal was pushed forward.
Thank you for the part numbers. I'll have to continue to do some digging.
-Chris
Attach file:
s-l1600 (1df).jpg (311.98 KB)
HH56 wrote:
Can't see the bottom of the brake pedal very well to say for sure which year it is but with the rod extending backward you are probably correct at 55-6 You can compare pedals in the parts manuals. Plates 62-63 in the 51-4 manual and plate 13C in the 55-6.
Hey Howard,
Yeah, it is kind of hard to see in the pictures. I've reattached the one where its easiest to see, but circled the area in red. It's still really dark but hopefully it helps.
It looks as though the plate is underneath the pivot area which I believe would push backwards if the pedal was pushed forwards.
I imagine the 52-54 plate is above the pivot point which would push forward as the pedal was pushed forward.
Thank you for the part numbers. I'll have to continue to do some digging.
-Chris
Attach file:
s-l1600 (1df).jpg (311.98 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=232956