1946 Transmission Fork Problem

Posted by Jeremy On 2016/2/11 11:34:42
A local shop replaced my 2nd-3rd shifting fork with a good used fork 300 miles ago. In that short time one of the fork's brass blocks has worn down almost 1/8 inch. It looks like it has been pushed very hard toward 3rd gear (photo attached). We did some measurements and it does not look like the fork is bent. Any ideas why just one side would get so much wear so quickly?

Attach file:


jpg  (74.33 KB)
947_56bcb809b350a.jpg 800X732 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=172130