Re: The rear axel blues!
Posted by kunzea On 2019/4/19 12:29:14
As I posted earlier, the two bearing cups, axles (with fixed thrust bearings) and the thrust block are in direct contact end-to-end and they float between the backing plates. The diameter of the center holes in the shims is larger than the bearing cup diameter, allowing both cups to move.
I will use a dial indicator and vise grips to measure the end play.
Attach file:
(135.51 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=211062