Re: 54' pacific brakes??
Posted by HH56 On 2016/7/24 19:31:54
Here is the tubing run and fill instructions but I forget where I got it or who posted the instructions.
One thing I would wonder about is the relief port in the BTVs between the seals that is supposed to provide an air or fluid path to the reservoir if either side seal starts leaking. With this arrangement if the vacuum side had issues it could still draw fluid into the power unit since there would be no air to pull.
Attach file:
(71.16 KB)
(77.72 KB)
One thing I would wonder about is the relief port in the BTVs between the seals that is supposed to provide an air or fluid path to the reservoir if either side seal starts leaking. With this arrangement if the vacuum side had issues it could still draw fluid into the power unit since there would be no air to pull.
Attach file:
(71.16 KB)
(77.72 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=179449