Re: # 4 cylinder

Posted by PackardV8 On 2016/10/18 20:40:58

ok. i went and looked up the firing order.
Double chek to be sure if this is right for your engine:

1 6 2 5 8 3 7 4.

CHECK to make sure that #7 wire is NOT touching the #4 wire AT ANY POINT.

Might want to go thru the ENTIRE firing order to make sure that no plug wire is touching THE NEXT plug wire ready to fire.

IF the wires run thru a metal tube then it does not matter if the wires touch each other.

There needs to be AT LEAST 1/4" clearence between the wires of any 2 consecutively fireing cyclinders.