Re: Dashboard wiring
Posted by HH56 On 2016/11/19 14:39:26
Many parts stores carry a crimp on style bullet connector -- both male and female -- in small 5 or 10 packs. The male shape is just a tiny bit different than the original but still works well in the original switch female side. Most Packard connectors will use the .156 size and since most 6v wiring is 14 or 16 gauge you would use the blue most often.
Crimper tools are also available at various price points. Amazon has some as do many parts and hardware stores. Get a decent quality item. Some of them are so poorly constructed they will not make a proper crimp which can cause a lot of issues down the road. For increased reliability I generally take the plastic off and solder directly to the terminal but that may not be an easy option when working behind the dash.
Attach file:
(11.37 KB)
Crimper tools are also available at various price points. Amazon has some as do many parts and hardware stores. Get a decent quality item. Some of them are so poorly constructed they will not make a proper crimp which can cause a lot of issues down the road. For increased reliability I generally take the plastic off and solder directly to the terminal but that may not be an easy option when working behind the dash.
Attach file:
(11.37 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=184719