Re: Timming on my 54' 327

Posted by Moms 54 On 2016/12/11 23:26:26
When my timming marks line up side by side then No #8 tappet exhaust plunger is not in the position of loosening it self from the valve just after closing of the valve.

But when #8 exhaust valve and plunger just unmate from each other the cam gear mark shows 180` off from a side by side with the drive gear.

As for #1 combustion stroke I was just noting where in position it was at.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=185599