Re: Motor/transmission removal and reinstall, 48 coupe

Posted by HH56 On 2016/12/24 11:16:22

If Kanter or Max does not have them, McMaster has the 2" length but not the 4 9/16 length. They are available to purchase individually in various strengths.

Don't remember what thread the block takes but they have the 2" studs in both 3/8 single thread sizes. If the stud uses a fine 3/8-24 thread on the exposed end and 3/8-16 on the block then only the two inch is carried. You would have to do as O_D suggests and use the bolt for the longer one. If they are the single size thread on each end then both are available in 6" lengths of all thread which you could cut down to 4 9/16.