Re: Unplugging a Scully Ventalarm
Posted by HH56 On 2017/4/7 20:05:21
The first bulletin on clearing the whistle had the mechanic blow air down the vent just as you did. With no results that way, Packard says the housing is soldered on so possibly it could be unsoldered and the whistle cleaned.
Depending on what dissolves the sealer compound, it might also be possible to pour something down the vent tube such as lacquer thinner or xylene or maybe even one of the really powerful methylene chloride or similar paint strippers to remove the goo. If the whistle would survive the cleaning is a question though.
Attach file:
(186.07 KB)
Depending on what dissolves the sealer compound, it might also be possible to pour something down the vent tube such as lacquer thinner or xylene or maybe even one of the really powerful methylene chloride or similar paint strippers to remove the goo. If the whistle would survive the cleaning is a question though.
Attach file:
(186.07 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=190137