Re: Loss Of Compression After Valve Work

Posted by Steve On 2017/5/2 19:22:04

When I first replaced the Head Gasket, I cleaned up the Block and Valves Installed a New Head Gasket and the Motor Wouldn't even turn over. I removed the Spark Plugs and turned it over and Water shot out Several of the Cyclinder's. That is when I decided to take the Head to the Machine Shop and they told me it was Twenty-Five Thousands off(.0025).

I made sure that Number One (1) Piston was up and Rotor in Dist. Was at Number One Plug in Dist. Cap.

the4hundred