Re: Change of radiator core affecting cooling performance in 1949, 23rd series

Posted by fredkanter On 2017/7/11 12:38:19

I read the article on mold cooling. I also spoke to an automotive radiator design engineer. As I suspected, much of the downward flow is turbulent due to either the small cross section of the tubes or dimples that are in the tubes to create turbulence so it seems that laminar vs. turbulent flow may not be an issue.

Here's a good article to read:http://www.overclockers.com/watercooling-physics-laminar-and-turbulent-flow/