Re: Fuel line routing.

Posted by HH56 On 2017/7/11 10:35:27

Assuming the 2150 was like the 2122, the fuel line goes inward of the L shock absorber, around it between the battery tray and then down and under the frame rail for a short distance. There is a bolt type clamp under the rail. It then comes out and goes on the outside of the rail and down the length of the car. The clamps sort of suspend the line to clear the body outriggers until it gets to the rear axle arch where it is flush with the rail and then heads inward to the tank outlet.

I couldn't tell for sure the length and type of the original cushions but chose to add a couple of split hoses at the front where it makes the bend around the shock absorber and frame and then goes under the frame. You can't see it well in the photo but there is one of the push in frame line hangers similar to those seen on the axle arch that is located between the two sections of hose.

Attach file:

---

  (65.23 KB)


  (68.57 KB)


  (102.45 KB)


  (34.90 KB)


  (72.84 KB)


  (58.12 KB)


  (118.09 KB)


  (133.63 KB)


  (107.94 KB)