Re: fuel issue or carburetor issue?

Posted by HH56 On 2017/8/20 16:48:17
Good point. Have you definitely narrowed it down to fuel and not electrical. Does it sputter or miss for a few revs like it is running out of fuel or just quit as if the key was turned off. A bad coil or other component or a wire that is shorting out from vibration or movement could also cause the symptom. If your distributor is the type with a fabric covered inner wire running between the points and outside terminal, that wire has been known to ground out as the vacuum advance moves the plate.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=195116