Re: 53 Clipper Tank and sending unit

Posted by HH56 On 2017/9/19 19:47:08
Also look in the trunk between the left taillight and center of car for the spot where the wire exits thru the trough at the back of the floor. Follow the wires and you should find black plastic connectors. It may be anywhere -- even by the tail light but if not there look under the car in the same area. There is a connector for the license lights and another joins a short piece of wire coming from the sender to the main loom. That connector could have been pulled apart.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=195982