Re: Brake Drum Studs/Pins

Posted by John on 2017/11/7 8:57:18
See if you can find a longer lug bolt, or piece of "all thread" that fits your drum. Cut a length of the "all thread", or cut the head off of the lug bolt and screw the threaded portion in a few threads to act as a support while you screw in the other lug bolts. Remove the piece and replace with your last lug bolt, then tighten all.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=197297