Re: 47 Custom Super Clipper Dash

Posted by HH56 On 2018/1/10 22:30:36

Progress. Just be sure none of the stripper wound up and is still in any of the folded over seams. That stuff can pick the worst places to ooze from if it ever turns liquid again.

Are you going to woodgrain or just paint. If you woodgrain with the GrainIt kit I suggest a light gray primer. I used red because that appeared to be what the factory used. It was so dark and the base paint was so thin I had to lay on and waste several heavy coats of the base color to get the light yellow orange finish needed for the background in the GrainIt process.