Re: turn signal cancel switch
Posted by Wesley Boyer On 2017/12/18 0:19:43
Same here, if it doesn't work find out why. Here's a couple more pictures what to look for.
Once I loosened the clamp at the bottom of the steering column (in the engine bay) and the bracket under the dash, I was able to use a pry bar and move the outside steering column up enough to close the gap between the steering column and the steering wheel.
The first picture is from Howard and my second picture has the parts in reverse order.
Good luck !
Wes
Attach file:
(128.82 KB)
(156.79 KB)
Once I loosened the clamp at the bottom of the steering column (in the engine bay) and the bracket under the dash, I was able to use a pry bar and move the outside steering column up enough to close the gap between the steering column and the steering wheel.
The first picture is from Howard and my second picture has the parts in reverse order.
Good luck !
Wes
Attach file:
(128.82 KB)
(156.79 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=198534