Re: Silicon brake fluid

Posted by Packman34&53 On 2018/2/12 21:16:19

Thanks Don & Howard for the replies! The fluid seems to be leaking between the distribution fitting & the threaded fitting in the end of the master cylinder. But the "O" ring on the top where fluid is added is somewhat stretched I guess from the silicone. If that in an "O" ring above the distribution fitting I suppose it could be stretched also! I've been reading & some say to use denatured alcohol & some say don't! Booster Dewey is the one who told me to flush with Dot 4 but they don't rebuild Bendix Treadlevacs!