1952 200 DeLuxe Ultramatic Questions
Posted by philo4500 On 2018/4/1 20:24:12
Hi there
I'm reading her since a longer time. I have a 1952' 200 Deluxe Sedan with Ultramatic, Easamatic, Hydraulic Lifters.
I have following questions:
I did a Hydraulic Lifter Change Job. After assemblage of the head with a new head gasket it is necessary to draw back the head screws more than one time to have the 62 Footpounds correctly?
Which Oil i should use for my 288 Engine (with Oil Filter Canister and Bypass Hose to the Lifter Gallery). I would say a 20W50 Classic Oil? (Engine is still in Original 65'000miles condition, with Oli Pan removed and cleaned from Stuck by myself)
Which Oil i do need for the Ultramatic Transmission? Is there a Filter Unit i need to change?
With best regards from Switzerland
Felix
Attach file:
(184.96 KB)
I'm reading her since a longer time. I have a 1952' 200 Deluxe Sedan with Ultramatic, Easamatic, Hydraulic Lifters.
I have following questions:
I did a Hydraulic Lifter Change Job. After assemblage of the head with a new head gasket it is necessary to draw back the head screws more than one time to have the 62 Footpounds correctly?
Which Oil i should use for my 288 Engine (with Oil Filter Canister and Bypass Hose to the Lifter Gallery). I would say a 20W50 Classic Oil? (Engine is still in Original 65'000miles condition, with Oli Pan removed and cleaned from Stuck by myself)
Which Oil i do need for the Ultramatic Transmission? Is there a Filter Unit i need to change?
With best regards from Switzerland
Felix
Attach file:
(184.96 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=201746