Re: Oil Bath Air Cleaner Support Bracket
Posted by Packard Don On 2018/5/19 11:42:12
Trying to reply but keep letting a time-out error even though only a few minutes have elapsed since I logged in.
Here are some photos from the bracket on my 1951 Henney-Packard ambulance which has the 5-main 327 and 2-brl carburetor. The bent end attaches to a bolt on the side of the head while the straighter slotted end is attached to the air cleaner itself using the long bolt that holds it together. As I recall, the brackets look very similar between the 2-brl and 4-brl filters but were not interchangeable and of course, the 1954 with the 359 was completely different
Attach file:
(215.05 KB)
(249.12 KB)
(222.52 KB)
Here are some photos from the bracket on my 1951 Henney-Packard ambulance which has the 5-main 327 and 2-brl carburetor. The bent end attaches to a bolt on the side of the head while the straighter slotted end is attached to the air cleaner itself using the long bolt that holds it together. As I recall, the brackets look very similar between the 2-brl and 4-brl filters but were not interchangeable and of course, the 1954 with the 359 was completely different
Attach file:
(215.05 KB)
(249.12 KB)
(222.52 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=202934