Re: Trouble - broken manifold bolt.
Posted by Jim Kavanagh On 2018/6/18 12:29:23
Thanks for the reply. This gives me some real confidence in choosing a direction.
The kit I see from NAPA is this shown below. I note that some of the kits use a sleeve the insert tool and insert go through. It looks like they are for finer threads. I assume it is not needed for this application or it would be in the kit?
This is sufficient to prevent water leaking through the hole? I will use Permatex anyway, but this is the best option? I have an L-head Plymouth where certain bolts go into the water jacket and must be sealed so i am used to that drill.
Attach file:
(17.68 KB)
The kit I see from NAPA is this shown below. I note that some of the kits use a sleeve the insert tool and insert go through. It looks like they are for finer threads. I assume it is not needed for this application or it would be in the kit?
This is sufficient to prevent water leaking through the hole? I will use Permatex anyway, but this is the best option? I have an L-head Plymouth where certain bolts go into the water jacket and must be sealed so i am used to that drill.
Attach file:
(17.68 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=203630