Re: 22nd series inst. panel removal

Posted by Joe Wareham On 2018/11/14 9:58:56
When you find the articles, they will help. Here's a picture of the back of the dash. I believe the cluster is held in with 2 bolts on the bottom that bolt to the dash (picture shows the holes) and 2 nuts attached to the middle of each side of the gauge cluster (clear in picture on the left side). I believe this should loosen it to come forward. Careful with the wires. Hope this helps.

Joe

Attach file:


jpg  (58.82 KB)
8531_5bec382a028fc.jpg 800X600 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=207384