Re: 1948 Super Side View Mirrors
Posted by BDeB On 2009/1/23 16:26:13
There should be a metal spacer between the mirror and the belt moulding that fits between the ribs on the moulding. Thickness is 1/16 inch, width 5/16 inch and length 4-1/8 inch with the ends slightly rounded to match the base of the mirror. Diameter of the holes is about 3/16 inch with spacing to match the mirror base.
Attach file:
(304.79 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=20586