Re: tracking down ticking noise
Posted by JeromeSolberg On 2021/10/26 22:57:25
This sounds like exactly the same problem I am having. It is driving me crazy.
Did you ever figure it out?
Btw, I checked compression (cold) and I had 120 psi in all the cylinders.
I did have an issue with oil in one of the cylinders, the one I thought had the bad lifters. I also had some issue with the head gasket in that cylinder. When I replaced the head gasket I checked the guides and they both seemed good (all the guides were new, I replaced each of them myself). I don't have a good explanation for that either, especially since the compression is good.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=238108