Re: Brake adjustment

Posted by Mark Graber On 2019/7/9 19:54:37

I had to walk away from this project for a while. Meantime, I obtained four NOS drums and had the shoes arced using the Speedwell Garage method. Thanks Ross, my machinist says it worked great! I also procured a couple of NOS anchor pins to try out.

However, much to my disappointment, my adjustment problems continue. No matter which method I use, either Ross's or a feeler gauge, I cannot get the secondary shoe equalized. I get drag at the bottom of the shoe, and clearance at the top. The anchor pin reaches maximum throw without moving the top of shoe close enough to the drum. The problem is at all four brakes.

I purchased the shoes from Max and I suppose it is possible, but very unlikely that I have the wrong shoes.

Guidance and ideas from you guys would be much appreciated.

Mark