Re: 327ci mystery
Posted by 50 2382 On 2019/6/12 14:37:35
Make sure the firing order is correct...
A way to determine a vacuum leak is to squirt brake cleaner at the suspected areas and listen to see if there is a change in the sound of the engine. The cleaner is flammable so be careful.
At the distributor remove the vacuum line and plug. Then see if there is a change in the readings.
You can also remove the distributor cap and attach a vacuum pump to a line attached to the advance, pull in some vacuum and see if the plate the points ride on moves and stays moved. If the plate moves back there is a hole in the diaphragm.
Maybe a leak in the carb to manifold gasket.
Just some more ideas....
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=212403