Re: Pillar Hinge Seal/Weatherstripping

Posted by Dell On 2019/6/12 20:00:01

Howard is correct as the 22 series is the same. Not a fun job, if you are not a handy kind of guy you will be. the seals are about $170 from Steele rubber. I would use a lot of B-P blaster and if the nuts don't turn, cut then off. If you force then you can distort the clip and tabs on the fender. The hardest aspect is that you are working in a hole which you will see when the kick panel is removed. The bolts are a carriage type with a low head and can be replaced by grinding down the head to make it thinner. I you would like some pictures I have no upholstery in my 48 woodie. Good luck Dell