Re: loud starter spinning noise

Posted by Joshua Martin On 2009/2/7 20:20:12
Sorry guys, I'm havin a little bit of trouble with the wiring still and the diagram, When I look directly at my carburator (53 sedan) theirs two connectors one above and one below, One is for the starter I know that, however I'm not sure which is which, and I believe the wiring to my starter was switched the most by the mechanic.

Here's what the damage is like:
The small solenoid above the starter is connected to the carb (bottom). "bolted to the highest point of starter"

The side of the starter has these wires connected, one to the "batt" on regulator and two others connecting under the dash.

I think the problem maybe the solenoid on top of the starter connecting to the carb

Any help... PLEASE!!

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=21552