Re: Bushings for Brake and Clutch pedals on 23rd series
Posted by HH56 On 2019/7/26 12:47:26
The shaft is the same for 21st and 22nd series so I will presume the mount is similar if not identical as well. The description and photos is of a 21st series.
The clutch end of the shaft fits into a hole in the frame which has solid section remaining on one side forming a D shaped opening. There is a portion of the shaft ground down to form another D shape at the end to slide into the hole. The D shape keeps the shaft from rotating and the frame hitting the end of the ground down portion and possibly a retaining ring keeps the shaft locked in the hole. The other end of the shaft has a retaining clip which fits into a groove to keep the pedals, springs, washers and shims etc contained on the shaft. There is a bracket which bolts to the crossmember that goes over the end of the shaft and presses against the other side of the retaining clip to farther lock the shaft in the frame hole and the car.
Attach file:
(68.09 KB)
(53.92 KB)
The clutch end of the shaft fits into a hole in the frame which has solid section remaining on one side forming a D shaped opening. There is a portion of the shaft ground down to form another D shape at the end to slide into the hole. The D shape keeps the shaft from rotating and the frame hitting the end of the ground down portion and possibly a retaining ring keeps the shaft locked in the hole. The other end of the shaft has a retaining clip which fits into a groove to keep the pedals, springs, washers and shims etc contained on the shaft. There is a bracket which bolts to the crossmember that goes over the end of the shaft and presses against the other side of the retaining clip to farther lock the shaft in the frame hole and the car.
Attach file:
(68.09 KB)
(53.92 KB)This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=213690