Re: Overdrive kickdown switch position

Posted by Ross On 2019/8/2 10:12:41
I suggest you look into your car starter switch. The kickdown should be at a point beyond full throttle. The start position is somewhat before 3/4 throttle. BUT, the starter switch should never engage the starter while the car is running. If so it is assembled wrong. Pull the starter switch out and make certain that the notch on the actuator that contacts the ball is facing UP.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=213915