Re: Brake pedal removal / help appreciated!

Posted by Mark Graber On 2019/9/2 22:56:17
Jason,
My '47 is a different design, but if you haven't already, I would take a look at the Part Diagram Plate #63 in the Parts list on this site. Doesn't show very clearly, but might give you some clues until someone else chimes in. From the diagram, it looks to me that the zerk end should have a c-clip or something to hold that end in place. I see the parts list calls for 1.30655 "retaining ring".
Good luck,
Mark

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=214868