Re: Water Distribution Tube Removal

Posted by HH56 On 2009/2/8 15:16:23

Here is what Packard recommended as a tool in the 51-4 manual. It sounds like yours is really "sedimented" in place. Maybe a longer rod to reach halfway or further back so less likely to tear holes and also maybe work the rod a bit to see if any stuff can be loosened on the inside of tube which might break a bit holding the outside loose with it. Have you tried with a hose and nozzle to see if anything can be flushed.

Attach file:

---

  (46.20 KB)