Re: Help with Overdrive

Posted by Ross On 2019/12/11 7:34:11

That is the correct switch. The days are over when NAPA knew what they had when talking about this old stuff. You will need to buy two nuts that fit the shank so you can mount it on the bracket right where the push rod from the gas pedal comes through the floor. Install it so when the pedal is pushed all but to the floor the plunger is depressed. The lower terminals connect to the governor and to the relay and the uppers connect to terminal (?) on the solenoid and to the positive terminal on the ignition coil. I'll bet Howard has the diagram at his fingertips and can post it.