Re: 1948 Packard not starting

Posted by Ross on 2020/4/18 20:01:48
That is the standard routing for bathtub filters. The bottom passage in the block is the one coming from the oil pump. The upper passage goes back over to the right side and feeds all the lifters. How 'bout just pulling your gage line off at the lower fitting and cranking the engine a bit to see if something comes out.

I am still confused in that your original post said something about pegging the gage?? What happened right after that?

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=221446