Re: 1952 Packard pelican
Posted by Ernie Vitucci On 2020/6/6 12:23:29
Good Morning...There is a wedge on the inside between the wings. Take the entire thing off the car and turn it over and tighten the wedge. That should do it...If it is really stripped out, you might be able to tap it and use a one size larger small bolt...or JB Weld it from the inside...then let it sit for a day or two...Good Luck, Ernie in Arizona
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=223103