Timing Chain wear allowance
Posted by Tim Stockwell On 2020/6/8 18:43:44
Hello everyone,
My question is how much timing chain wear is tolerable. I have a 51' 300 with a 327. I think it jumped time by 180 degrees. When I pulled the timing cover off, the cam gear "O" marking were out 1/2 turn. I make sure the #1 piston was in the compression stroke and the rotor is pointing to #8 cylinder. The chain 3/4 - 1" of play.
What do you folks think?
Tim
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=223187