Re: Timing Chain wear allowance

Posted by Tim Stockwell On 2020/6/21 17:27:51

That did not work. The factory manual is not clear. What picture shows may be for the 200 engines. Bill Vasser, an old Packard buddy, told me to remove the tappet cover and see where the #1 intake and exhaust tappets can spin. That will be when both valves are seated. I will then see where the "O" line up. At this point I will see where the cam is positioned and maybe I need to just rotate the crank one turn because I think it is on the exhaust stoke.

Tim